Details -
The NEW ProPeak Cavalier EQ is a
microprocessor-controlled high-performance charger for NiCd/NiMH/LiPo/Pb
batteries with an integrated individual-cell voltage balancer. The ProPeak
Cavalier has features seen on some of the best chargers sold today, but it
offers them at half the price. Get your Cavalier today and power up for less!
FEATURES:
* Voltage Balancer for LiPo Batteries
The Cavalier EQ has an internal
individual cell voltage balancer so there is no need for a separate balancer
when charging LiPo battery packs.
* Delta-Peak Sensitivity
The automatic charge-termination program
works on the principle of the Delta-peak voltage detection.
* Capacity Limit:
The charging capacity is always
calculated by multiplying the charging current by the charge time. If the
charging capacity exceeds the limit, the process will be terminated
automatically when you set the maximum value.
* Temperature Limit :
The battery temperature will rise while
charging because of its internal chemical reaction .If you set the temperature
limit, the charging process will be terminated when the limit has been reached.
This function requires the use of the optional Temperature Sensor.
* Processing Time Limit:
You can also restrict the maximum process
time to help protect against possible defects in the battery pack.
* Input Power Monitor:
When using a 12v car battery as the input
power, the charger will monitor its voltage and shut off if the voltage from
the car battery becomes too low. This is to protect against your car battery
being over-discharged and not having enough power to start your car.
* High-Power and High-Performance Circuit:
The Cavalier EQ employs a circuit that
has a maximum output power of 50W. As a result, it can charge up to 14
NiCd/NiMH cells and a series of 5 LiPo batteries with a maximum current of 5.0A.
The current will be automatically reduced if the 50W limit is exceeded.
TECHNICAL
SPECS:
* Operating voltage range: 10.0-18.0 Volt
* Circuit power: Max. 50W
* Charge current range: 0.1-5.0A
* Current drain for balancing LiPo:
200mAh/cell
* NiCd/NiMH battery cell count: 1-14 cell
* Lithium/Polymer cell count: 1-5 Series
* Pb battery voltage: 2 to 12V
* Weight: 360g
* Dimensions: 130 x 90 x 30 mm